X

Connect (X)

100-foot Articulated Lattice Tower

March 5, 2014

Pepro has announced the availability of a 100-foot articulated lattice platform tower that combines the easy set up and antenna

Articulated Lattice Tower

Articulated Lattice Tower

placement of the Pepro monopole towers with a lattice design that offers far greater height and support for multiple antennas or dishes.

Because the tower features the Pepro patented articulated design, it can be deployed section-by-section rather than telescoped to its full height. That means antennas can be attached to any section before the tower is raised, or the tower can be lowered easily with the antennas attached, adjusted as needed and restored to full height. At no point do technicians need to climb the tower. Depending on the site location and configuration, the Pepro lattice platform tower will also save customers 30 to 40 percent of the cost versus standard towers.

The 100-foot lattice tower has a footprint of 30 feet by 34 feet, weighs 22,390 pounds and complies with the TIA-222-G standard. It comes with 12 leveling jacks and 24 Ufer ground pads. It is intended for use with Pepro’s stationary enclosures measuring 8 feet by 8 feet to 8 feet by 16 feet.

Pepro’s platform tower design reduces installation time, liability, equipment downtime and cost while increasing safety. A total site, tower and shelter, can be operational within two days of installation. Pepro platform towers are designed to eliminate concerns and simplify operations. www.peprollc.com

Articulated Lattice Tower
Facebooktwitterlinkedinmail
Pepro

Related Posts

X